MIDEA 12K BTU DLFSFBH SERIES FLOOR CONSOLE SYSTEM

MIDEA 12K Floor Console Indoor Unit – Model DLFSFBH12XAK
Product Overview
Series: Midea INFINI Floor Console Series
System Type: Ductless mini-split floor console heat pump indoor unit
Application: Residential heating and cooling
Nominal Cooling Capacity: 12,000 BTU/h
Capacity & Performance
Cooling Capacity: 12,000 BTU/h
Heating Capacity:
14,000 BTU/h at 47°F (8.3°C)
12,000 BTU/h at 17°F (-8.3°C)
10,500 BTU/h at 5°F (-15°C)
9,000 BTU/h at -13°F (-25°C)
Efficiency Ratings
SEER2: 25.0 BTU/Wh
EER2: 12.5 BTU/Wh
HSPF2: 11.0 BTU/Wh
COP at 5°F: 2.5
Electrical & Power
Voltage: 208/230V, single-phase, 60Hz
Power Supply: Indoor unit is powered via the outdoor unit
Power Input:
Cooling: 1,050W
Heating: 980W
Circuit Breaker Requirement: 15A
Indoor Fan Motor Output: 40W
Refrigerant & Piping
Refrigerant Type: R-410A
Piping Connection Sizes:
Liquid Line: 1/4 inch
Suction Line: 1/2 inch
Refrigerant Charge:
Pre-charged with ~32.1 oz (910 g) for a standard 25-ft line
Additional charge required at ~0.21 oz per additional foot beyond 25 ft
Maximum Recommended Piping Length: 98.4 ft
Maximum Height Difference: 65.6 ft
Physical & Mechanical Characteristics
Dimensions:
Width: 31.26 inches (794 mm)
Height: 24.45 inches (621 mm)
Depth: 7.87 inches (200 mm)
Weight:
Net Weight: ~32.85 lbs (14.9 kg)
Mounting & Installation
Mounting Method: Floor or wall-mounted using a dedicated mounting plate
Wall Penetration: Requires a circular opening (~3 to 3.5 inches diameter) for refrigerant piping, drain hose, and control wiring
Clearance Requirements:
Minimum top clearance of ~5.9 inches (15 cm) for return airflow
Additional side and rear clearances required (detailed in installation manual)
Control Features & Operating Modes
Operating Modes: Cool, Heat, Dry, Fan, Auto
Key Features:
Microprocessor control with wireless remote
Auto-restart after power loss
Refrigerant leakage detection
"Follow Me" temperature sensing (uses remote as sensor)
Integrated, washable air filter
Noise Level: As low as ~32.7 dB(A) in low-speed sleep mode
Summary
The Midea INFINI Floor Console Series 12K BTU indoor unit (DLFSFBH12XAK) is designed for floor or low-wall mounting, offering quiet, energy-efficient heating and cooling. It features multiple operating modes, built-in air filtration, and a sleek design that integrates seamlessly into residential or light commercial spaces.
Note: This unit must be paired with a compatible outdoor unit in a single-zone or multi-zone system to function. For installation diagrams, wiring configurations, and clearance requirements, refer to the official submittal data sheet or consult an authorized Midea distributor.