top of page

MIDEA 12K Hyper Heat Pump Multi-Zone Outdoor Unit 25 SEER2 Series 208/230V

SKU: DLFSHCH12XAK
MIDEA 12K Hyper Heat Pump Multi-Zone Indoor Unit – Model DLFSHCH12XAK
Product Overview
  • Series: Midea INFINI Hyper Heat Series (SEER 25, Energy Star)
  • System Type: Multi-zone ductless mini-split hyper heat pump indoor unit
  • Application: Residential heating and cooling
  • Nominal Cooling Capacity: 12,000 BTU/h
Capacity & Performance
  • Cooling Capacity: 12,000 BTU/h
  • Heating Capacity:
    • 14,000 BTU/h at 47°F (8.3°C)
    • 12,000 BTU/h at 17°F (-8.3°C)
    • 10,500 BTU/h at 5°F (-15°C)
    • 9,000 BTU/h at -13°F (-25°C)
Efficiency Ratings
  • SEER2: 25.0 BTU/Wh
  • EER2: 12.5 BTU/Wh
  • HSPF2: 11.0 BTU/Wh
  • COP at 5°F: 2.5
Electrical & Power
  • Voltage: 208/230V, single-phase, 60Hz
  • Power Supply: Indoor unit is powered via the outdoor unit
  • Power Input:
    • Cooling: 1,050W
    • Heating: 980W
  • Circuit Breaker Requirement: 15A
  • Indoor Fan Motor Output: 40W
Refrigerant & Piping
  • Refrigerant Type: R-410A
  • Piping Connection Sizes:
    • Liquid Line: 1/4 inch
    • Suction Line: 1/2 inch
  • Refrigerant Charge:
    • Pre-charged with ~32.1 oz (910 g) for a standard 25-ft line
    • Additional charge required at ~0.21 oz per additional foot beyond 25 ft
  • Maximum Recommended Piping Length: 98.4 ft
  • Maximum Height Difference: 65.6 ft
Physical & Mechanical Characteristics
  • Dimensions:
    • Width: 34.65 inches (880 mm)
    • Height: 12.60 inches (320 mm)
    • Depth: 8.07 inches (205 mm)
  • Weight:
    • Net Weight: ~28.7 lbs (13.0 kg)
    • Gross Weight: ~35.3 lbs (16.0 kg)
Mounting & Installation
  • Mounting Method: Wall-mounted using a dedicated mounting plate
  • Wall Penetration: Requires a circular opening (~3 to 3.5 inches diameter) for refrigerant piping, drain hose, and control wiring
  • Clearance Requirements:
    • Minimum top clearance of ~5.9 inches (15 cm) for return airflow
    • Additional side and rear clearances required (detailed in installation manual)
Control Features & Operating Modes
  • Operating Modes: Cool, Heat, Dry, Fan, Auto
  • Key Features:
    • Hyper heat functionality for enhanced low-temperature performance
    • Microprocessor control with wireless remote
    • Auto-restart after power loss
    • Refrigerant leakage detection
    • "Follow Me" temperature sensing (uses remote as sensor)
    • Integrated, washable air filter
  • Noise Level: As low as ~29 dB(A) in low-speed sleep mode

    • PRODUCT RESOURCES

      The following documents may not be readily available online. For specific manuals or certifications, we recommend contacting Midea customer support or an authorized Midea dealer:

      • Brochure
      • Submittal
      • Installation Manual
      • Owner's Manual
      • Service Manual
      • Parts Manual
      • AHRI Certificate
      • Extended Ratings

       

      Safety Information

      PROPOSITION 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

      • This unit must be installed by a licensed HVAC technician to ensure proper operation and to avoid voiding the warranty.
      • Ensure the product is connected to the correct voltage and electrical specifications to prevent electrical hazards.
      • Do not attempt to modify or service internal components without professional assistance.
      • The unit is designed to operate in temperatures ranging from -4°F to 115°F.
      • Always refer to the installation manual for detailed safety instructions.

       

       

    • PAIRING

       DLFSHCH12XAK (12K BTU) pairs with DLFUAAH12XAK (AHU), DLFSOAH12XAK (Cassette), and DLFSDAH12XAK (Ducted)

    bottom of page