MIDEA 24K Floor Console Multi-Zone Indoor Unit
MIDEA 24K Floor Console Multi-Zone Indoor Unit – Model DLFSFAH24XAK
Product Overview
- Series: Midea Floor Console Series
- System Type: Multi-zone ductless mini-split floor console heat pump indoor unit
- Application: Residential and light commercial heating and cooling
- Nominal Cooling Capacity: 24,000 BTU/h
Capacity & Performance
- Cooling Capacity: 24,000 BTU/h
- Heating Capacity:
- 28,000 BTU/h at 47°F (8.3°C)
- 24,000 BTU/h at 17°F (-8.3°C)
- 21,000 BTU/h at 5°F (-15°C)
- 18,500 BTU/h at -13°F (-25°C)
Efficiency Ratings
- SEER2: 25.0 BTU/Wh
- EER2: 12.5 BTU/Wh
- HSPF2: 11.0 BTU/Wh
- COP at 5°F: 2.5
Electrical & Power
- Voltage: 208/230V, single-phase, 60Hz
- Power Supply: Indoor unit is powered via the outdoor unit
- Power Input:
- Cooling: 2,250W
- Heating: 2,300W
- Circuit Breaker Requirement: 25A
- Indoor Fan Motor Output: 60W
Refrigerant & Piping
- Refrigerant Type: R-410A
- Piping Connection Sizes:
- Liquid Line: 3/8 inch
- Suction Line: 5/8 inch
- Refrigerant Charge:
- Pre-charged for a standard 25-ft line
- Additional charge required for lengths beyond 25 ft
- Maximum Recommended Piping Length: 98.4 ft
- Maximum Height Difference: 65.6 ft
Physical & Mechanical Characteristics
- Dimensions:
- Width: 42.05 inches (1,068 mm)
- Height: 26.57 inches (675 mm)
- Depth: 9.25 inches (235 mm)
- Weight:
- Net Weight: ~55.12 lbs (25 kg)
Mounting & Installation
- Mounting Method: Floor console installation, with the ability to be mounted near the floor or ceiling
- Wall Penetration: Requires a circular opening (~3 to 3.5 inches diameter) for refrigerant piping, drain hose, and control wiring
- Clearance Requirements:
- Minimum clearance of ~5.9 inches (15 cm) for return airflow
- Additional side and rear clearances required (detailed in installation manual)
Control Features & Operating Modes
- Operating Modes: Cool, Heat, Dry, Fan, Auto
- Key Features:
- Adjustable airflow control with up/down louver movement
- Built-in condensate pump for efficient drainage
- Microprocessor control with wireless remote
- Auto-restart after power loss
- Refrigerant leakage detection
- "Follow Me" temperature sensing (uses remote as sensor)
- Integrated, washable air filter
- Noise Level: As low as ~39 dB(A) in low-speed sleep mode
Optional Accessories
- Wi-Fi Kit Console: KSAIF0401AAA
- Optional Wired Remote Controllers:
- KSACN0101AAA (Timer Function)
- KSACN0501AAA (7-Day Programmable)
Summary
The Midea 24K Floor Console Indoor Unit (DLFSFAH24XAK) is a high-performance, multi-zone ductless systemdesigned for residential and light commercial applications. It provides quiet, efficient heating and cooling, with the flexibility to be mounted near the floor or ceiling. Its integrated condensate pump, energy-efficient operation, and multiple control options make it a versatile and reliable climate control solution.
PRODUCT RESOURCES
The following documents may not be readily available online. For specific manuals or certifications, we recommend contacting Midea customer support or an authorized Midea dealer:
- Brochure
- Submittal
- Installation Manual
- Owner's Manual
- Service Manual
- Parts Manual
- AHRI Certificate
- Extended Ratings
Safety Information
PROPOSITION 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
- This unit must be installed by a licensed HVAC technician to ensure proper operation and to avoid voiding the warranty.
- Ensure the product is connected to the correct voltage and electrical specifications to prevent electrical hazards.
- Do not attempt to modify or service internal components without professional assistance.
- The unit is designed to operate in temperatures ranging from -4°F to 115°F.
- Always refer to the installation manual for detailed safety instructions.
PAIRING
DLFSFAH24XAK (24K BTU Floor Console) pairs with DLCSRBH24AAK (Current Loop U-match Outdoor Unit)
